The following are some information about the structure and appearance of the automatic assembly line:

 

1, sheet metal parts are all mechanically formed, the surface should be smooth.

 

2. The edges, welds and ends of mechanical parts after processing must be polished smooth and smooth, and no flying burrs can occur.

 

3. The overall design of the whole assembly line and wire body equipment should be firm and beautiful in structure. Except purchase standard parts, sheet metal parts, aluminum alloy and plexiglass and other non-metallic parts, all cover parts and structural parts and other surfaces should be surface anti-corrosion treatment; All surface color must be uniform and smooth.

 

4. Adopt split aluminum profile as guide rail, and the support of assembly line is aluminum profile.

 

5, each line body, equipment, facilities beautiful appearance, overall color coordination; Aluminum alloy profiles should be used as far as possible, and the steel surface should be sprayed, painted, electroplating and other anti-corrosion treatment as far as possible; The surface of transmission parts shall be treated with oxidation protection.

 

6, the main transmission parts (shaft, sprocket, chain, guide wheel, guide rail, etc.) should be appropriate heat treatment, to ensure the service life.

 

7, the surface treatment of parts should be based on the need to use electroplating, spraying, paint and other processes.

 

8. Adjustment measures shall be taken when installing the wire body and equipment. The wire body and equipment shall be installed horizontally, horizontally and vertically, and arranged neatly.