Wuxi Letter Yusheng assembly line what methods to adjust it?
CLICKS：889
Generally speaking, the assembly line is an effective combination of human and machine, which can fully reflect the production flexibility of assembly line equipment. It will transport system, which can be accompanied by jig and online special aircraft, the effective combination of detection equipment online production, in order to meet the requirements of the flow of a variety of products. The transmission mode of the assembly line is synchronous transmission of the forced type can also be asynchronous transmission flexible type, according to the choice of configuration, and then can achieve the requirements of assembly and transportation. For the transmission line in the enterprise's mass production is indispensable, for the enterprise to save labor costs, improve production efficiency.
Conveying line is mainly to complete its material conveying task. Around the warehouse, production workshop and packaging workshop of the site, set up by many belt conveyor, roller conveyor and other components of a conveyor chain, connected by the end to form a continuous conveyor line. At the entrance of the material and out of the sorting type conveyor line - conveyor mouth is provided with and path fork device, lift and ground conveyor line.
Thus in the warehouse, production workshop and packaging workshop within the scope of the formation of a smooth to each production position at the same time is closed circulation conveyor line system. All materials, parts, components and finished products used in the production process must be placed in pallets with bar codes before entering the conveyor system. Under the action of production orders issued by the production management system, pallets containing materials enter the conveyor line system from designated inlets. Check the deviation value of the two planes of the head and tail frame mounting bearing seat. If the deviation between the two planes is greater than 1mm, the two planes should be adjusted in the same plane. The adjustment method of the head drum is: if the conveyor belt deviates to the right side of the drum, the bearing seat on the right side of the drum should move forward or the bearing seat on the left side should move backward; If the conveyor belt deviates to the left side of the drum, the bearing seat on the left side of the drum should move forward or the bearing seat on the right side should move backward. The adjustment method of the tail drum is just opposite to the head drum.
1. The production capacity of each process on the assembly line is balanced and proportional, and the existence of bottlenecks is not allowed. The distribution of materials required for production must be timely, accurate and qualified according to the beat.
2. All kinds of auxiliary processes of production and material distribution activities are carried out around the assembly line. Raw materials and parts should be delivered online from various areas according to the requirements of anti-radiation, so that the products on the line are moving, the workers are relatively fixed, and the assembly line is the "served".
3. The production process of the assembly line is carried out continuously and repeatedly according to a certain beat, and its operation is efficient and has a strong rhythm. The interval is generally not allowed. Therefore, it is basically not allowed to produce too long waiting time and equipment processing intermittent time. Therefore, the amount of time that the production line is stopped due to various interference factors (such as the quality of parts and parts, inaccurate material distribution or wrong material, which often lead to the shutdown) is usually used as the production comprehensive evaluation index to measure the production line or production operations.
4. Only one or a few series of products with similar process structure are produced on the assembly line, and the material only moves in one direction.
5. Please change into work clothes and shoes when entering the workshop. Do not wear gloves when using pneumatic or power tools, and be sure to wear masks and protective glasses.
